We are developing and improving the structural biology research environment
using the high-brilliance synchrotron radiation at SPring-8.

For those who have an accepted proposal, Beamtime survey for 2021B (Non-proprietary research proposal)

From 2021B, Cryo-TEM and Bio-SAXS have become available. Please apply by following the steps below.
This guidance is for “Non-proprietary research proposal”. If you have “Proprietary research proposal”, please click here.

Common subject matter

  1. Shifts will be decided according to the rating of your proposal when it was reviewed.
  2. If there is unallocated beamtime(machine time) after the allocation of each period, there will be a call for additional beamtime(machine time). Please refer to the announcement.
  3. Please note that the proposal numbers of the proposals that were accepted in 2020A have been changed. The number can be checked at the UI site


PX-Beamline (BL41XU, BL45XU, BL32XU, BL26B1, BL26B2)

The deadlines for the three periods of 2021B are as follows.
 1st period (10am September 29 to 10am November 8): closed
 2nd period (10am November 9 to 10am December 13): closed
 3rd period (10am January 17 to 10am February 6)
Please refer to the following for a detailed beamtime Schedule

If you wish to use a beamline during three periods, please fill “Survey_Sheet” and “Spec_Sheet” and upload them from the application page. If you have a photo of the crystal, please upload it. We will inform the principal investigator by email the user name and password of the application page. If there are multiple assignments, please upload each.

PX-BLs Specifications
Beamtime Survey Sheet
Crystal Spec Sheet
Beamtime Schedule


  1. Automatic data collection (with or without visit) can be used at BL45XU,BL41XU and BL32XU. Since international travel is currently very difficult, please consider using automatic data collection without visit. Please note that from October 2020, the operation of BL45XU will be changed to be ready for the operation of the Uni-puck automatic exchange system.
  2. Remote access can be used at BL26B2 and BL41XU. Please contact the beamline staff for details » bioxtal (followed by @spring8.or.jp).
  3. You can send three requests with priorities. In each request, only one beamline can be selected from BL41XU, BL45XU, BL32XU, BL26B1 or BL26B2.
  4. The shortest unit of beamtime is 0.25 shifts [2 hours] for BL32XU (Only measurement without visiting) and BL41XU and BL45XU, 1.5 shifts [12 hours] for BL32XU(Visiting measurement), and 1 shift [8 hours] for BL26B1 and BL26B2.
  5. Date of measurement will be decided after arrangement.


CryoTEM

Please check here for the public use of CryoTEM.

The deadlines for the three periods of 2021B are as follows.
 1st period (10am September 29 to 10am November 8): closed
 2nd period (10am November 9 to 10am December 25): closed
 3rd period (10am January 11 to 10am March 27)
Please refer to the following for a detailed machine time schedule

If you wish to use a beamline during three periods, please fill “Survey_Sheet” and “Spec_Sheet” and upload them from the application page. If you have a photo of the sample with an electron microscope, please upload it. We will inform the principal investigator by email the user name and password of the application page. If there are multiple assignments, please upload each.
The measurement date will be adjusted and notified after the number of shifts is determined.

Pre-use training course is required to use the CryoTEM either through regular workshop or your own machine time. If you wish to have machine time before taking the course, please indicate so in the special notes.

Information about CryoTEM
Machinetime Survey Sheet
Sample Spec Sheet
Machinetime schedule

Bio-SAXS

SEC-SAXS or Static measurements of protein solution samples are available.

The deadlines for the three periods of 2021B are as follows.
 1st period (10am September 29 to 10am November 8): closed
 2nd period (10am November 9 to 10am December 13): closed
 3rd period (10am January 17 to 10am February 6)

If you wish to use a beamline during three periods, please fill “Survey_Sheet” and “Spec_Sheet” and upload them from the application page. If you have a gel filtration profile data of the sample, please upload it. We will inform the principal investigator by email the user name and password of the application page. If there are multiple assignments, please upload each.
The measurement date will be adjusted and notified after the number of shifts is determined.

Information about Bio-SAXS
Machinetime Survey Sheet
Sample Spec Sheet

Contact

e-mail (followed by @spring8.or.jp)
Contactbioxtal


SPring-8 Program Review Committee, L1 Subcommittee